What does window installation cost in Winnipeg? With us it isn’t a separate bill: every window on an Arctic Star quote has one installed price, and a medium casement runs about $850 – $1,300 before tax and rebates. That price pays for the window and for the work around it: taking the old one out, setting, insulating and sealing the new one, finishing the trim inside and out, and hauling the old window away. Here’s what a proper installation includes, what makes one cost more or less, and how to line up two quotes so you’re comparing the same job.
The short answer
- Installation is part of the window’s price. We quote one installed price per window, with no separate labour line. For every style and size, see the full 2026–27 price guide.
- The method matters most. An insert that keeps the old frame is less work than a full-frame replacement that goes back to the rough opening. They aren’t the same job.
- The house matters next. Stucco, brick and stone, upper storeys, bays and bows, basement windows set in concrete, deep walls and rot under the old window all add time.
- A much lower quote is often a smaller job. Before you compare totals, check that both quotes use the same method, the same finishing inside and out, and the same glass.
What our installed window price includes
A replacement window is ordered to the size of its opening, so we price the window and the labour to fit it together, one line per window. Here are three common styles:
| Window | Small | Medium | Large |
|---|---|---|---|
| Casement | $750 – $1,150 about 24″ × 40″ | $850 – $1,300 about 30″ × 48″ | $950 – $1,450 about 36″ × 56″ |
| Slider | $550 – $800 about 30″ × 17″ | $600 – $900 about 36″ × 22″ | $800 – $1,200 about 48″ × 36″ |
| Picture | $550 – $800 about 24″ × 36″ | $700 – $1,050 about 36″ × 44″ | $950 – $1,400 about 48″ × 54″ |
Ranges are installed prices before tax and rebates, white frames, based on Arctic Star’s own current quotes — the same numbers as our price calculator. Your exact price comes after a free in-home measure.
Each of those prices includes:
- A triple-pane vinyl window with Low-E glass and argon, ENERGY STAR certified and made in Canada
- Installation by our own crew, not subcontractors, with insulation and finishing
- Removal and disposal of the old window
- Rotten wood found under the window, replaced at no charge
- A lifetime transferable warranty, plus a lifetime accidental glass breakage warranty
A painted exterior colour adds about 18% over white in our price calculator. Your invoice still lists each window’s description, NRCan reference number, size and price, because the Efficiency Manitoba rebate application asks for them. Budgeting for the whole house? See the cost to replace all the windows in a house, with worked examples by house type.
What a professional window installation includes
Natural Resources Canada’s four-step guide to choosing windows ends with the installer: use a professional, get three quotes when possible, and make sure there is “plenty of low-expansion insulating foam” around the new windows (NRCan). A triple-pane window set into a leaky, uninsulated gap still feels drafty. A full replacement goes like this:
- Measure and order. Each opening is measured for width, height, wall depth and squareness, and the window is made to fit. See how to measure for replacement windows.
- Remove the old window. The sashes come out first, then the frame is cut free of the wall. On stucco, brick and stone this is slow, careful work, because the finish around the opening has to survive it.
- Inspect and repair the opening. With the frame out, the sill and framing are visible for the first time in decades. Rotten wood is cut out and replaced before anything new goes in.
- Set the new window. It’s shimmed level, plumb and square, fastened, then opened, closed and locked to check that nothing binds.
- Insulate and air-seal the gap between the new frame and the wall framing, with low-expansion foam and a sealed joint on the room side.
- Finish inside and out. Inside, jamb extensions and casing. Outside, brickmould or trim, flashing where the wall needs it, and sealant. NRCan’s Keeping the Heat In says to caulk the outside of a window only after the inside is sealed: the other way round, it “can trap warm, moist air in the wall” (NRCan).
- Clean up and haul away the old windows, the old trim and the debris.

We do this all year. In winter we work one opening at a time, with the room closed off and sealants and foam made for the cold, and each window is insulated and sealed before the next one comes out. See how winter installs work.
Insert or full-frame: the choice that changes the job
- Insert (also called retrofit). The old sashes come out, the old frame stays, and the new window is set inside it. Less comes apart and most of the trim stays, so it’s quicker and usually costs less. The trade-offs: a frame inside a frame leaves less glass, and whatever is behind the old frame, such as rot or an empty, uninsulated gap, stays hidden.
- Full-frame. Everything comes out, down to the rough opening. It’s more labour and it needs new trim inside and out, but the opening can be inspected, repaired, insulated and sealed, and the glass stays as big as the opening allows.
NRCan’s test is the condition of the frame: inserts “can be a good option” if the frames are still in good condition, and if a frame is in poor condition, “it may be time to replace the unit”. On an older wood window, check the sill first, because years of condensation and melting frost run down the glass and soak into it. Push a screwdriver into the sill and the bottom corners of the frame. If it sinks in, an insert is the wrong choice.
The method doesn’t affect the rebate. Efficiency Manitoba’s terms ask for the existing window to be replaced “with a full frame unit that has an NRCan number”, and glass-only replacements aren’t eligible (Efficiency Manitoba). That wording is about the product, a complete new window rather than new glass in the old frame, not about how it’s installed. Every window we install is a complete new window with its own NRCan number, so it qualifies whether it goes in as an insert or full-frame. For both methods step by step, see retrofit vs full-frame installation. At your free estimate, ask us which method we recommend for each opening and why.
What makes a window installation cost more or less
Two windows of the same size can be very different amounts of work. Here is what moves the labour, and the question each one should prompt:
| What changes the work | Why | Ask this |
|---|---|---|
| Stucco, brick or stone instead of siding | The old frame has to come out without cracking the finish, and the new trim has to cover and seal that joint. A brick or stone opening also fixes the window’s size. | Who repairs the wall finish if it chips? |
| Upper storeys and awkward access | Ladders or staging, more setup, more care with every lift. A window over a porch roof or deck is harder to reach. | Is there a charge for height or access? |
| Bay and bow windows | Several windows in one opening, with a seat, a head board, a small roof, and weight the framing has to carry. About 2 hours for us, against 35 to 40 minutes for a standard window. | How is it supported, and are the seat and roof insulated? |
| Basement windows | The opening is in the concrete foundation, often with an old frame set into it and a window well outside. 1 to 2 hours for us, depending on trim and finish. | Does the old frame come out, and how are the concrete edges finished? |
| Interior trim and jamb extensions | Most walls are deeper than a window frame, so the gap is finished with a jamb extension (vinyl, PVC, wood or a drywall return), then casing. | Which material, is new casing included, and who paints it? |
| Exterior brickmould or capping | New brickmould comes in several widths. Capping is metal bent over existing wood trim, usually with an insert. | Which one, how wide, what colour? |
| Rot under the old window | Soft sills and framing have to be rebuilt first, and nobody can see them until the old frame is out. | What do you charge if you find rot? |
| Disposal | Old windows are bulky, heavy and full of glass. | Is hauling them away included? |
Rot and disposal are the two that can turn into extras on installation day, so they’re the two we take off the table: rotten wood found under a window is replaced at no charge, and the old windows leave with us.

Two limits to know about. In basements we replace windows in their existing openings: we don’t cut concrete, enlarge an opening or install egress windows. See basement window replacement and the egress window rules in Manitoba. And on a bay or bow, the seat, head board and roof decide how warm the window is in January, so read bay vs bow windows before you compare prices.
Most whole-house window jobs take 1 to 3 days (see how long window replacement takes). The wait before installation day changes through the year, so ask us for the current lead time or check our FAQ. Where your window lands in a price range is settled at the free in-home measure, when we can see the wall, the trim and the access.
How to compare two window installation quotes
Manitoba’s Consumer Protection Office advises getting two or three detailed written estimates. Each should be dated, describe the work, list the materials, and show the cost breakdown, total cost, deposit, start and completion dates, and warranty coverage (Province of Manitoba). For windows, these are the questions to ask so two quotes are comparable:
- Is this an installed price? If installation is a separate line, what does it cover, and what could be added on the day?
- Insert or full-frame, for each opening?
- Who installs? The company’s own employees or a subcontractor? Ours is our own crew.
- What happens if you find rot? Included, priced by the hour, or quoted once it’s found?
- How is the gap insulated and sealed? Look for low-expansion foam all the way round.
- What finishes the inside and the outside? Jamb extension material, new or reused casing, brickmould or capping, and who fixes damaged stucco or siding.
- Is it the same glass? Triple-pane or double, how many Low-E coatings, argon or air, and the ER or U-factor on the label. See our guide to window energy labels.
- Is it the same window? A slider quoted against a casement isn’t a fair comparison. Match the style and which sections open.
- Are removal and disposal included?
- What does the warranty cover, and does it transfer if you sell the house?
- Tax, deposit and deadline. Are taxes in the total, how much is due up front, and how long is the quote good for? Ours is usually good for one month.
For judging the company itself, see 10 questions to ask a window company.
Permits, the rebate and your right to cancel
- Permit. The City of Winnipeg lists “Replacing doors & windows with same size” among projects that don’t need a building permit, though the building code still applies (City of Winnipeg). For a new or larger opening, call the City’s Permits Direct Line at 204-986-5140 first.
- Rebate. As of November 2026, Efficiency Manitoba pays $100 per eligible window opening. A bay counts as one opening, new or altered openings don’t qualify, and you apply within 90 days of installation and payment in full. Our rebate guide has the steps; confirm the current rules with Efficiency Manitoba before you count on it.
- Financing. Manitoba Hydro’s Home Energy Efficiency Loan covers up to $7,500 of windows and doors, repaid with interest on your energy bill over up to 5 years. Hydro must approve it “before any work is started or any materials are purchased” (Manitoba Hydro). We help with the application.
- Cancelling. Manitoba gives you 10 days to cancel a direct sales contract, such as one signed at your home, not counting the day you sign (Province of Manitoba). Our customers get those 10 days.
Common questions
How much does it cost to install a window in Winnipeg?
With us, installation is included in each window’s price: about $550 – $800 for a small slider, $850 – $1,300 for a medium casement and $950 – $1,400 for a large picture window, installed, in white, before tax and rebates. Bay, bow and combination windows cost more.
Is installation included in the price of new windows?
At Arctic Star, yes. One price covers the window, installation by our own crew with insulation and finishing, removal and disposal of the old window, and both lifetime warranties. Not every quote is built that way, so always ask whether a price is for supply only or installed.
Is a full-frame window replacement more expensive than an insert?
Usually, because the old frame comes out and the trim is replaced inside and out. In return, the opening can be inspected, repaired, insulated and sealed, and you keep more glass. An insert only makes sense when the old frame is still in good condition.
Does it cost more to install windows in a stucco or brick house?
It takes more care than siding, because the old frame has to come out without damaging the finish around the opening, and the new trim has to seal against it. Ask each company how the exterior will be finished and who pays if the stucco chips.
Do I need a permit to replace windows in Winnipeg?
Not for a same-size replacement, which the City of Winnipeg lists among projects that don’t need a building permit. The work still has to meet the building code, and a new or enlarged opening is a different project, so check with the City before you start one.
How long does it take to install a window?
A standard window takes our crew about 35 to 40 minutes. A basement window takes 1 to 2 hours depending on the trim and finish, and a bay or bow about 2 hours. Most whole-house jobs are done in 1 to 3 days.
Planning a window installation?
We measure every opening, tell you which windows qualify for the rebate, and give you one installed price per window. Book a free in-home estimate, call (204) 202-3434, or get a ballpark first with the price calculator.
Want one installed price for every window?
Book your estimate